1～15 item / All 73 items
It is a universal material testing machine with a maximum load capacity of 50 kN and 20 kN.
■We can also accommodate tests for engineering plastics. ■You can choose from a wide range of chucks (gripping tools) and jigs. ■It is possible to measure from tensile modulus* to elongation at break. (※An optional high-precision extensometer is required.)
It is a testing machine that automatically conducts tensile tests on plastic films.
●If you set the test specimens on the tray, all processes from dimension measurement ⇒ chucking ⇒ gauge length extension measurement ⇒ specimen removal ⇒ data processing will be performed automatically. ●Continuous testing of 100 test specimens is possible. It contributes to labor-saving, efficiency improvement, and enhanced reproducibility in measurement tasks. ●Compact space-saving design.
If you set the test specimen on the tray, all processes from measuring the test specimen dimensions to chucking, measuring the elongation between reference lines, removing the test specimen, and data processing will be performed automatically.
● Up to 200 test specimens can be tested continuously. Contributes to labor-saving, efficiency, and improved reproducibility of measurement tasks. ● Accurate measurement from tensile modulus to fracture elongation using a high-precision gauge. ● Compact space-saving design.
A fully automatic Charpy impact testing machine that performs all processes automatically from setting the test specimen, measuring the test specimen dimensions, setting it on the support table, to measuring the impact value and data processing.
●Up to 300 test specimens can be tested continuously. It contributes to labor-saving, efficiency, and improved reproducibility of the Charpy impact test. ●Test specimen transport ⇒ Measurement of specimen thickness and notch depth ⇒ Setting on the sample stage ⇒ Automatic processing of measurement data.
This is a DuPont-style drop impact testing machine suitable for adhesion strength (peeling) tests due to coating impact, with a maximum drop height of 500mm.
There are also H-100 (drop height 1000mm) and H-200 (drop height 2000mm) for plastic sheets. *The photo shows the H-100 model.
This is a friction testing machine that applies a constant friction load to test specimens such as woven fabrics, coatings, and cardboard, and evaluates the degree of wear through visual inspection and other methods.
●By attaching additional weights to the balanced arm, the test load can be up to a maximum of 2000g. ●The number of reciprocations of the sample stage can be set to your desired count using the preset counter.
The evaluation is based on the wear reduction of the rubber test piece pressed against the surface of the abrasive paper wrapped around the circumference of the rotating drum.
-
It is used to indicate the Rockwell hardness of materials such as plastic, measured by pressing a steel ball against the surface.
○Reference Standards: JIS B 7726, B7730, K 7202-2, Z2245, ASTM E18, D 785, ISO 6508-1, -2, -3, ISO 2039-2 ○Power Supply: AC100V, single phase, 2A (domestic), AC200-240V, single phase (overseas), 50/60Hz (selectable) ○Dimensions and Weight: W196×D487×H820mm, approximately 82kg ●For other functions and features, please refer to the catalog or contact us.
It is a testing machine that evaluates the hardness of a coating by pressing a pencil of known hardness against the coating film using the pencil hardness method.
Type NP is also compatible with the Clemens scratch hardness test for decorative boards.
Compact tabletop demarcation bending test machine
● It is a compact and space-saving tabletop model. ● It can test 12 specimens simultaneously. ● Consideration has been given to safety and noise reduction.
This is a testing machine for evaluating the creep properties of plastics.
●No weight replacement operation is required, and the load setting can be easily done by moving the weights on the lever using motor drive. ●The distance between the load lever and the lever cushioning base is automatically controlled, minimizing the load impact during specimen fracture.
This is a testing machine that reproduces the state in which thin paper, fibers, and films bend under their own weight to calculate the Clark's breakage (stiffness).
It reproduces the state when paper and fiber products bend under their own weight, automatically adjusts the protrusion length of the test specimen, and measures the critical length and stiffness.
This is a testing machine that evaluates the tear strength of materials such as plastic film, paper, and textiles using the Elmendorf method.
<Reference Standards> Paper: JIS P 8116 Plastic: JIS K 7128-2, ISO 6383-2 Fiber: JIS L 1096 (Please specify as the dimensions of the clamp will change)
The tear strength of materials such as paper, film, and fabric is measured by the loss of potential energy of a pendulum in the shape of a fan, and the calculation results are displayed digitally.
<Reference Standards> Paper: JIS P 8116 Plastic: JIS K 7128-2, ISO 6383-2 Textiles: JIS L 1096 (Please specify as the dimensions of the clamp will change)
It is used for heating deformation tests of electric wires and can test three samples simultaneously.
-
